Automated headland management for tractors, sprayers, mowers and harvesters.
With headland maneuver programming, multiple functions can be combined and activated together using just one button. This greatly simplifies maneuvering at the end of rows when working in the fields. All functions can be activated and deactivated individually for each vehicle via a graphical interface to perfectly adapt to the work being carried out.
Before it can be used, the headland programming system must be added to the respective vehicle once from the store or workshop. It will appear as a possible configuration. The cost of this operation is 3 euros.
By default, it can be activated and deactivated in the vehicle with SHIFT(left) + X. Other keyboard shortcuts can be chosen for activation and deactivation. The GUI is called by default with Shift+Ctrl+X.
New: management of headland maneuvers now allows contour guidance, i.e. automatic guidance along the edge of the field or the worked area.
Important: when contour guidance is activated, a working speed of 10 km/h must not be exceeded, otherwise the guidance risks oscillating strongly. In this case, it is usually sufficient to briefly reduce the speed.
Features included:
– Reduce the speed (cruise regulator) and reassemble the tools, reactivate the cruise regulator if it was previously active.
– Raise the tools and lower them again.
– Turn the plow over, in one or two steps (via the central position)
– Raise and change sides of the seed drill markers
– Automatic control of crab walking when going back and forth
– Disengage and re-engage the power take-off(s) and hydraulic system
– Beep when headland management is activated
– On/off switch: Headland management can be turned on or off. This helps prevent accidental triggering during transfer to the scene of intervention and improves road safety.
– Automatic headland management: automatic activation of headland mode when the headland is reached. Optional return to field mode once the 180° turn is completed.
– Contour guidance: Automatic control along the field boundary or along the machined area
If the VCA Mod (FS22_VehicleControlAddon) is present:
– Deactivate and reactivate GPS track guidance
– Disengage and re-engage the active differential locks
– Triggering the rollover function
If the Guidance Steering function (FS22_guidanceSteering) is present:
– Disable and re-enable GPS guidance
– Automatic headland management: automatic activation of headland management when reached
In the presence of an EnhancedVehicle (FS22_EnhancedVehicle):
– Deactivate and reactivate GPS guidance, trigger the U-turn function as desired
– Unblock and reactivate active differential locks
– Use of EV headland detection, if it has been enabled
Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement, please write in German or English
ChangeLog:
V2.1.0.0:
– Improved timing of different work stages
– Improved control of potato harvesters and similar vehicles.
– Added lifting option: front implements first, then rear implements
– Headland automation independent of Guidance Steering
– Optional automatic return to field mode at the end of a half turn
– Power button added (lShift+lAlt+X)
– Option to temporarily deactivate automatic headland maneuvers by pressing a button (no predefined button, can be defined as desired in the button settings)
– Revised status display on vehicle HUD
– Vehicle measurement to adjust the front and rear triggers when a work tool is hitched or unhitched.
– Possibility of manually overriding automations
– Local backup and restoration of the configuration for each type of work tool
– Impound management available in mission vehicles
V2.1.0.1:
– Local save and restore in relation to Manual Attach now only for respective players and not globally
– Correction of the cruise control configuration at the headland
V2.1.0.2:
– Fix for update 1.4/1.4.1 to avoid lua callstacks
V2.2.0.0:
– Added support for EnhancedVehicle Mod
– Added support for SpeedControl Mod
– Configuration enabled for slurry vehicles
– Added an option to hide key assignments in the F1 menu
V2.2.1.1
– Fixed an issue: After entering the GUI, busy keys only worked correctly if the vehicle itself was selected.
V2.2.1.2
– Added FM_VEHICLES category to supported vehicle categories
V2.2.2.0
– Fixed a bug that prevents correct timing when turning plows
V2.3.0.0
– Outline guide
V2.3.1.0
– Contour guidance: optimized parameters
– Contour guidance: Contour guidance settings can now be modified via the console and are saved in the modSettings directory
– Vehicle measurement: improved determination of vehicle width
With headland maneuver programming, multiple functions can be combined and activated together using just one button. This greatly simplifies maneuvering at the end of rows when working in the fields. All functions can be activated and deactivated individually for each vehicle via a graphical interface to perfectly adapt to the work being carried out.
Before it can be used, the headland programming system must be added to the respective vehicle once from the store or workshop. It will appear as a possible configuration. The cost of this operation is 3 euros.
By default, it can be activated and deactivated in the vehicle with SHIFT(left) + X. Other keyboard shortcuts can be chosen for activation and deactivation. The GUI is called by default with Shift+Ctrl+X.
New: management of headland maneuvers now allows contour guidance, i.e. automatic guidance along the edge of the field or the worked area.
Important: when contour guidance is activated, a working speed of 10 km/h must not be exceeded, otherwise the guidance risks oscillating strongly. In this case, it is usually sufficient to briefly reduce the speed.
Features included:
– Reduce the speed (cruise regulator) and reassemble the tools, reactivate the cruise regulator if it was previously active.
– Raise the tools and lower them again.
– Turn the plow over, in one or two steps (via the central position)
– Raise and change sides of the seed drill markers
– Automatic control of crab walking when going back and forth
– Disengage and re-engage the power take-off(s) and hydraulic system
– Beep when headland management is activated
– On/off switch: Headland management can be turned on or off. This helps prevent accidental triggering during transfer to the scene of intervention and improves road safety.
– Automatic headland management: automatic activation of headland mode when the headland is reached. Optional return to field mode once the 180° turn is completed.
– Contour guidance: Automatic control along the field boundary or along the machined area
If the VCA Mod (FS22_VehicleControlAddon) is present:
– Deactivate and reactivate GPS track guidance
– Disengage and re-engage the active differential locks
– Triggering the rollover function
If the Guidance Steering function (FS22_guidanceSteering) is present:
– Disable and re-enable GPS guidance
– Automatic headland management: automatic activation of headland management when reached
In the presence of an EnhancedVehicle (FS22_EnhancedVehicle):
– Deactivate and reactivate GPS guidance, trigger the U-turn function as desired
– Unblock and reactivate active differential locks
– Use of EV headland detection, if it has been enabled
Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement, please write in German or English
ChangeLog:
V2.1.0.0:
– Improved timing of different work stages
– Improved control of potato harvesters and similar vehicles.
– Added lifting option: front implements first, then rear implements
– Headland automation independent of Guidance Steering
– Optional automatic return to field mode at the end of a half turn
– Power button added (lShift+lAlt+X)
– Option to temporarily deactivate automatic headland maneuvers by pressing a button (no predefined button, can be defined as desired in the button settings)
– Revised status display on vehicle HUD
– Vehicle measurement to adjust the front and rear triggers when a work tool is hitched or unhitched.
– Possibility of manually overriding automations
– Local backup and restoration of the configuration for each type of work tool
– Impound management available in mission vehicles
V2.1.0.1:
– Local save and restore in relation to Manual Attach now only for respective players and not globally
– Correction of the cruise control configuration at the headland
V2.1.0.2:
– Fix for update 1.4/1.4.1 to avoid lua callstacks
V2.2.0.0:
– Added support for EnhancedVehicle Mod
– Added support for SpeedControl Mod
– Configuration enabled for slurry vehicles
– Added an option to hide key assignments in the F1 menu
V2.2.1.1
– Fixed an issue: After entering the GUI, busy keys only worked correctly if the vehicle itself was selected.
V2.2.1.2
– Added FM_VEHICLES category to supported vehicle categories
V2.2.2.0
– Fixed a bug that prevents correct timing when turning plows
V2.3.0.0
– Outline guide
V2.3.1.0
– Contour guidance: optimized parameters
– Contour guidance: Contour guidance settings can now be modified via the console and are saved in the modSettings directory
– Vehicle measurement: improved determination of vehicle width
Games
Farming Simulator 22
Manufacturer
Lizard
Author
Size
0.17 MB
Platform
PC / MAC