Automatic Loading of Small Flatbed Trailer:
– The trailer frame, rims and body can be colored.
– The trailer has 5 different body configurations:
– Standard flatbed trailer for transporting and transporting bales (cost €15).
– Tipping skip without cover (additional cost of €15).
– Addition of a cover to the dumpster (additional cost of €1).
– Wood forks (additional cost of €1).
– Liquid tank (cost €10) and slurry/digestat spreader with a working width of 000 meters (cost €18) in additional configuration.
– Can be configured as a flat hitch or gooseneck trailer hitch (cost €1).
– The height of the gooseneck hitch is adjustable to suit different vehicles.
– A rear trailer hitch is also available as an option. (cost €100)
– Standard Lizard tires and rims are custom made.
– The trailer is equipped with ramps for loading and transporting small machines.
– The ramps work with both the flatbed option and the grain trailer option to load small machines into the trailer bed.
– The cover has a collision and there cannot be any vehicle or other products in the trailer box when it is closed.
– Bucket capacity – 22 liters.
– Can transport up to 8 meters of logs.
– Support for FS22_UniversalAutoload mod.
– Support for FS22_SelectableBaleCapacity module.
– Logs can be loaded automatically when used with the FS22_UniversalAutoload mod. (PC/Mac only)
– The strobe lights are custom modeled and have real lights so they reflect off the surroundings.
– The trailer has dedicated gamepad control buttons and keyboard/mouse controls to adjust the height of the gooseneck and front hitch so as not to conflict with other keyboard shortcuts.
– The flatbed trailer can be configured to automatically load round and square bales.
*NOTE: These abilities do not use the FS22_UniversalAutoload mod.
150 small square bales (conventional 1,2 meter bales)
20 square bales of 1,8 meters
18 square bales of 2,2 meters
16 square bales of 2,4 meters
10 Hesston square balls
18 round bales of 1,25 meters
14 round bales of 1,5 meters
14 round bales of 1,8 meters
3 round balls of cotton
1 square ball of cotton
– To use autoload with a keyboard and mouse, the “B” key starts and stops loading.
The “Y” key is then used to unload the bales using the left mouse button to place them in the desired location or to unload them directly onto the bed for manual unloading.
After unloading, the “Y” key must be pressed again to “reset” the automatic loading process for the next loading.
NOTE* The FS22_UniversalAutoload mod is not required for automatic bullet loading to work. However, for pallets to be loaded automatically, the FS22_UniversalAutoload mod must also be installed. (PC/Mac only)
To use the autoload feature with the FS22_UniversalAutoload mod, the trailer configuration must be set to the standard “Flat Bed” configuration (first choice of body configuration).
With the FS22_UniversalAutoload mod it is also possible to automatically load logs when the trailer is configured as a forestry trailer. (automatic loading of logs is not possible on consoles).
To use the automatic bale loading function without the FS22_UniversalAutoload mod (this option is available on all platforms), the trailer configuration must be set to the "automatic bale loading" configuration (second choice of body configuration) .
Changelog 2.0.0.1:
– Cleaned up unnecessary and repetitive descriptions in ModDesc.
– Fixed issue with trailer only loading 3 Hesston balls.
– Fixed gamepad and keyboard controls.
– Added keyboard shortcuts dedicated to unloading bullets with autoload when using gamepad controllers and/or keyboard and mouse.
– Added support for autoloading all 1x – 9x bullets from FS22_selectableBaleCapacity mod.
– The trailer frame, rims and body can be colored.
– The trailer has 5 different body configurations:
– Standard flatbed trailer for transporting and transporting bales (cost €15).
– Tipping skip without cover (additional cost of €15).
– Addition of a cover to the dumpster (additional cost of €1).
– Wood forks (additional cost of €1).
– Liquid tank (cost €10) and slurry/digestat spreader with a working width of 000 meters (cost €18) in additional configuration.
– Can be configured as a flat hitch or gooseneck trailer hitch (cost €1).
– The height of the gooseneck hitch is adjustable to suit different vehicles.
– A rear trailer hitch is also available as an option. (cost €100)
– Standard Lizard tires and rims are custom made.
– The trailer is equipped with ramps for loading and transporting small machines.
– The ramps work with both the flatbed option and the grain trailer option to load small machines into the trailer bed.
– The cover has a collision and there cannot be any vehicle or other products in the trailer box when it is closed.
– Bucket capacity – 22 liters.
– Can transport up to 8 meters of logs.
– Support for FS22_UniversalAutoload mod.
– Support for FS22_SelectableBaleCapacity module.
– Logs can be loaded automatically when used with the FS22_UniversalAutoload mod. (PC/Mac only)
– The strobe lights are custom modeled and have real lights so they reflect off the surroundings.
– The trailer has dedicated gamepad control buttons and keyboard/mouse controls to adjust the height of the gooseneck and front hitch so as not to conflict with other keyboard shortcuts.
– The flatbed trailer can be configured to automatically load round and square bales.
*NOTE: These abilities do not use the FS22_UniversalAutoload mod.
150 small square bales (conventional 1,2 meter bales)
20 square bales of 1,8 meters
18 square bales of 2,2 meters
16 square bales of 2,4 meters
10 Hesston square balls
18 round bales of 1,25 meters
14 round bales of 1,5 meters
14 round bales of 1,8 meters
3 round balls of cotton
1 square ball of cotton
– To use autoload with a keyboard and mouse, the “B” key starts and stops loading.
The “Y” key is then used to unload the bales using the left mouse button to place them in the desired location or to unload them directly onto the bed for manual unloading.
After unloading, the “Y” key must be pressed again to “reset” the automatic loading process for the next loading.
NOTE* The FS22_UniversalAutoload mod is not required for automatic bullet loading to work. However, for pallets to be loaded automatically, the FS22_UniversalAutoload mod must also be installed. (PC/Mac only)
To use the autoload feature with the FS22_UniversalAutoload mod, the trailer configuration must be set to the standard “Flat Bed” configuration (first choice of body configuration).
With the FS22_UniversalAutoload mod it is also possible to automatically load logs when the trailer is configured as a forestry trailer. (automatic loading of logs is not possible on consoles).
To use the automatic bale loading function without the FS22_UniversalAutoload mod (this option is available on all platforms), the trailer configuration must be set to the "automatic bale loading" configuration (second choice of body configuration) .
Changelog 2.0.0.1:
– Cleaned up unnecessary and repetitive descriptions in ModDesc.
– Fixed issue with trailer only loading 3 Hesston balls.
– Fixed gamepad and keyboard controls.
– Added keyboard shortcuts dedicated to unloading bullets with autoload when using gamepad controllers and/or keyboard and mouse.
– Added support for autoloading all 1x – 9x bullets from FS22_selectableBaleCapacity mod.
Games
Farming Simulator 22
Manufacturer
Lizard
Author
Size
20.03 MB
Platform
PC/MAC, PS4, PS5, XB1, XBS